Design of retrodiffraction gratings for polarization-insensitive and polarization-sensitive characteristics by using the Taguchi method.
Overview
Research
Identity
Additional Document Info
Other
View All
Overview
abstract
We present the design of retrodiffraction gratings that utilize total internal reflection (TIR) in a lamellar configuration to achieve high performance for both TE and TM polarized light and polarization-sensitive performance for gratings behaving as polarizer filters; the design was based on rigorous coupled wave analysis (RCWA) and the Taguchi method. The components can thus be fabricated from a single dielectric material and do not have to be coated with a metallic or dielectric film layer to enhance the reflectance. The effects of the structural and optical parameters of lamellar gratings were investigated, and the TIR gratings in a lamellar configuration were structurally and optically optimized in terms of the signal-to-noise ratio (S/N) and a statistical analysis of variance (ANOVA) of the refractive index, grating period, filling factor, and grating depth as control factors and the estimated efficiency by RCWA as a noise factor. For more accurate robustness, a two-step optimization process was used for each purpose. For TIR gratings designed to perform similarly for TE and TM incident polarization, the -1st-order efficiencies were estimated to be up to 92.0% and 88.5% for TE and TM polarization, respectively. Also, for the TIR gratings designed to achieve polarization-sensitive performance when behaving as a polarizer filters, the -1st-order diffraction efficiencies for TE and TM polarization were estimated to be up to 95.5% and 2.7%, respectively. From these analysis results, it was confirmed that the Taguchi method shows feasibility for an optimization approach to a technique for designing optical devices.
