Measurement of residual stresses by load and depth sensing spherical indentation Academic Article uri icon

abstract

  • The finite element method was used to determine whether load and depth sensing indentation with spherical indenters may be useful in the measurement of residual stresses in materials. The spherical indentation process for a wide range of elastic/ideal-plastic materials to which compressive and tensile biaxial stresses were applied was simulated using standard finite element techniques. The elastic moduli and yield stresses of the materials were varied systematically to model the behavior of a wide variety of metals and ceramics. Elastic-ideal-plastic materials were considered in the study with residual stress levels varied from zero up to the yield stress. All three indentation regimes - elastic, elastic-plastic, and plastic - were examined, with emphasis given to the elastic and the early part of the elastic-plastic regimes, where differences in the load-displacement characteristics caused by residual stress were found to have a significant effect. Systematic examination of the relationships among residual stress, contact pressure, and elastic recovery revealed a simple, measurable indentation parameter which correlates well with the residual stress. Using this parameter, an experimental technique is proposed by which residual stresses can be estimated from measurements of the load of an indentation in the elastic-plastic regime, the yield stress, and the elastic modulus of the material, all of which can be determined by load and depth sensing indentation methods. Based on a critical examination of the technique by finite element simulation, the technique appears promising.

published proceedings

  • Materials Research Society Symposium - Proceedings

author list (cited authors)

  • Taljat, B., & Pharr, G. M.

complete list of authors

  • Taljat, B||Pharr, GM

publication date

  • December 2000