Dual Matrix Converters Based Seven-phase Open-end Winding Drive Conference Paper

abstract

• This paper presents a novel seven-phase open-end winding drive system supplied by the dual non-square matrix converter. The input to each of the matrix converter is three phase utility grid system and the output is seven phase voltages with variable voltage and frequency. The two matrix converters feeding the seven-phase open-end load are supplied from a common single three-phase utility source of 50 Hz. Simple carrier-based PWM algorithm is developed to control the seven-phase open-end load. A simple R-L load is considered in the paper. The paper presents the analytical approach to obtain the expression of modulating signals that are used to generate the switching pulses for the matrix converter. Simulation results are presented to support the idea of the proposed modulation scheme. 2014 IEEE.

name of conference

• 2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE)

authors

• Abu-Rub, Haitham

published proceedings

• 2014 IEEE 23RD INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE)

author list (cited authors)

• Ahmed, S. M., Abu-Rub, H., Salam, Z., & Iqbal, A.

citation count

• 2

complete list of authors

• Ahmed, Sk Moin||Abu-Rub, Haitham||Salam, Zainal||Iqbal, Atif

publication date

• June 2014

publisher

• Institute of Electrical and Electronics Engineers (IEEE)  Publisher

published in

• n2163-5137ISSN  Journal

keywords

• Carrier-based Pwm
• Direct Matrix Converter
• Open-end Drive
• Seven-phase

Digital Object Identifier (DOI)

• 10.1109/isie.2014.6864942

International Standard Book Number (ISBN) 13

• 9781479923991

start page

• 2105

end page

• 2110

URL

• http://dx.doi.org/10.1109/isie.2014.6864942