PU IN COASTAL MARINE ENVIRONMENTS
Academic Article
Overview
Research
Identity
Additional Document Info
Other
View All
Overview
abstract
Analysis of water samples from the New York Bight area and Narragansett Bay reveals that a small fraction of the total Pu (probably Pu (III + IV) species) is continuously removed to the sediments at a rate similar to that of the particle-reactive isotope228Th. A more "soluble" Pu species appears to be released at times from the sediments to the water column in these nearshore regions. Sediments in shallow areas of the New York Bight south of Rhode Island and Narragansett Bay have high Pu inventories and relatively deep penetration of this element, although the net sediment accumulation rate is generally low (<0.03 g/cm2 yr). The high Pu inventories can be explained if both sediment resuspension and sediment mixing are assumed to be the major controlling factors for the effective transfer of Pu from the water column to the sediments. By simultaneous modelling of the depth distribution of three tracers which operate on vastly different time scales:234Th (half-life 24 days),210Pb (half-life 22 years) and239,240Pu (introduced into the environment during the past 30 years), bioturbation rates ranging from 4 to 32 cm2/yr in the surface mixed layer (5-10 cm thick) and from 0.3 to 2.5 cm2/yr in the layer below (up to 40 cm thick) and net sediment accumulation rates of approximately zero to 0.14 g/cm2 yr were calculated for these areas. 1980 Elsevier Scientific Publishing Company.
