Bus selection in multibus DC power systems Conference Paper uri icon


  • DC power systems, like the ones proposed for use in future naval electric ships, can be made more reliable by using multiple buses for redundancy. Multiple buses provide multiple configuration options for supplying power to the load. Diode OR'ing with auctioneering diodes is perhaps the most common method to connect a load to multiple buses. Although the diode action is automatic and fault-tolerant, it results in ill-defined bus currents when the bus voltages are similar and the potential for uncontrolled switching in a faulted high-impedance system. Active switching and bus converters with auctioneering diodes are control techniques that overcome these limitations by providing full control over the bus selection process. Using local information in the form of the bus voltage, these techniques do not rely on a centralized controller, which improves system reliability. Dwell time is shown as a technique to stabilize the state-dependent switching. 2007 IEEE.

name of conference

  • 2007 IEEE Electric Ship Technologies Symposium

published proceedings


author list (cited authors)

  • Balog, R. S., & Krein, P. T.

citation count

  • 10

complete list of authors

  • Balog, Robert S||Krein, Philip T

publication date

  • May 2007