Microwave induced welding of carbon nanotube-thermoplastic interfaces for enhanced mechanical strength of 3D printed parts Conference Paper uri icon

abstract

  • Copyright 2015. Used by the Society of the Advancement of Material and Process Engineering with permission. Three-dimensional (3D) printed parts produced by fused-filament fabrication of a thermoplastic polymer have become increasingly popular at both the commercial and consumer level. The mechanical integrity of these rapid-prototyped parts however, is severely limited by the interfillament bond strength between adjacent extruded layers. In this report we propose for the first time a method for welding thermoplastic interfaces of 3D printed parts using the extreme heating response of carbon nanotubes (CNTs) to microwave energy. To achieve this, we developed a coaxial printer filament with a pure polylactide (PLA) core and a CNT composite sheath. This produces parts with a thin electrically percolating network of CNTs at the interfaces between adjacent extruded layers. These interfaces are then welded together upon microwave irradiation at 2.45GHz. We investigated the dielectric properties of the PLA/CNT composites at microwave frequencies and performed in-situ microwave thermometry using a forward-looking infrared (FLIR) camera to characterize the heating response of the PLA/CNT composites upon microwave irradiation. Finally, computational models were developed to verify the microwave heating response of the percolating CNT composites according to their measured dielectric properties.

published proceedings

  • International SAMPE Technical Conference

author list (cited authors)

  • Sweeney, C. B., Green, M. J., & Saed, M. A.

complete list of authors

  • Sweeney, CB||Green, MJ||Saed, MA

publication date

  • January 2015