A low cost approach to improve the performance of an adjustable speed drive (ASD) under voltage sags and short-term power interruptions.
Conference Paper
Overview
Research
Identity
Additional Document Info
View All
Overview
abstract
Voltage sags are a common occurrence in industrial power distribution systems. Although a typical sag may last only 5-20 cycles and voltage magnitude lower than 20% of its rated value can trip an adjustable speed ac drive (ASD). Such a nuisance tripping of a continuous industrial process can be very costly. In this paper, a low cost approach to improve the performance of an ASD under voltage sag and short term interruptions is presented. The approach consists of a low cost modification (addition of three diodes, D 7, D 8, D 9 and an inductor L, Fig. 4) to the front end diode rectifier topology. This modification along with the dynamic braking IGBT (Q db) control (standard component in a ASD) is shown to provide ride-through capability for voltage sags. Further, it is shown that with the addition of the diode D 10 and battery E (Fig. 4) the ride-through capability can be extended to short-term power interruptions also. The IGBT Q db is suitably controlled in the event of a sag to maintain rated de-link voltage in closed loop, thus avoiding any nuisance tripping or momentary speed fluctuations. A 460 V, 10 hp commercially available ASD is modified with the proposed approach. Analysis, design and simulation results are discussed. Experimental results illustrating the performance of the ASD with the proposed ride-through topology for a wide range of voltage sag conditions are presented.