A programmable data acquisition and control system for magnetic resonance imaging: application to mutually coupled surface coil arrays and temperature monitoring.
Academic Article
Overview
Research
Identity
Additional Document Info
Other
View All
Overview
abstract
A programmable data acquisition and control system was developed for use in conjunction with magnetic resonance imaging (MRI). The controller consists of two functional blocks: a host system and a remote system. The remote system resides inside the shielded room housing the magnet. The host, an IBM compatible personal computer, is located at the technician's console. Communication between these devices is implemented over a fiber optic RS-232 data link. This configuration allows experiments to be performed remotely by using a series of keyboard typed commands, by programming the host to send a series of commands, or by directly programming the remote system. As an example of its capabilities, the controller was used to tune and match arrays of receiver coils for localized imaging and to record the rectal temperature of a sedated rat during image acquisition.