Synchrophasor Reference Algorithm for PMU Calibration System Conference Paper

abstract

• 2016 IEEE. This paper describes a reference algorithm specifically designed for PMU Calibration System. Contrary to existing DFT-based and curve fitting-based methods, which use a single signal model, the proposed algorithm applies an adaptive mechanism, and switches signal models according to specific signal input. Signals are modeled with parameters with apparent and certain physical meaning, fundamentally avoiding error magnification from derivative calculation for frequency and rate of change of frequency estimation. Levenberg-Marquardt algorithm is used for solving the signal parameters. The test results show that the proposed algorithm has a much higher accuracy than the requirements of IEEE standard C37.118.1, and hence can serve as a reference algorithm in a PMU Calibration System.

name of conference

• 2016 IEEE/PES Transmission and Distribution Conference and Exposition (T&D)

authors

• Kezunovic, Mladen

published proceedings

• 2016 IEEE/PES TRANSMISSION AND DISTRIBUTION CONFERENCE AND EXPOSITION (T&D)

author list (cited authors)

• Qian, C., & Kezunovic, M.

citation count

• 14

complete list of authors

• Qian, Cheng||Kezunovic, Mladen

publication date

• May 2016

publisher

• Institute of Electrical and Electronics Engineers (IEEE)  Publisher

published in

• Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference  Journal

keywords

• Levenberg-marquardt Algorithm
• Pmu Calibration System
• Power System Measurements
• Reference Synchrophasor Algorithm
• Synchrophasor Estimation

Digital Object Identifier (DOI)

• 10.1109/tdc.2016.7520024

International Standard Book Number (ISBN) 13

• 9781509021574

start page

• 1

end page

• 5

volume

• 2016-July

URL

• http%3A%2F%2Fdx.doi.org%2F10.1109%2Ftdc.2016.7520024