Processing of pulse oximeter signals using adaptive filtering and autocorrelation to isolate perfusion and oxygenation components Conference Paper uri icon

abstract

  • A blood perfusion and oxygenation sensor has been developed for in situ monitoring of transplanted organs. In processing in situ data, motion artifacts due to increased perfusion can create invalid oxygenation saturation values. In order to remove the unwanted artifacts from the pulsatile signal, adaptive filtering was employed using a third wavelength source centered at 810nm as a reference signal. The 810 nm source resides approximately at the isosbestic point in the hemoglobin absorption curve where the absorbance of light is nearly equal for oxygenated and deoxygenated hemoglobin. Using an autocorrelation based algorithm oxygenation saturation values can be obtained without the need for large sampling data sets allowing for near real-time processing. This technique has been shown to be more reliable than traditional techniques and proven to adequately improve the measurement of oxygenation values in varying perfusion states.

name of conference

  • Optical Diagnostics and Sensing V

published proceedings

  • Optical Diagnostics and Sensing V

author list (cited authors)

  • Ibey, B., Subramanian, H., Ericson, N., Xu, W. J., Wilson, M., & Cote, G. L.

citation count

  • 2

complete list of authors

  • Ibey, B||Subramanian, H||Ericson, N||Xu, WJ||Wilson, M||Cote, GL

editor list (cited editors)

  • Priezzhev, A. V., & Cote, G. L.

publication date

  • January 2005