Reservoir evaluation, completion techniques, and recent results from Barnett Shale development in the Fort Worth Basin Book uri icon

abstract

  • This paper describes the evaluation, completion, stimulation, and testing of Barnett Shale wells operated by Mitchell Energy Corporation (MEC) in the Fort Worth Basin of north-central Texas. On the basis of the data analyzed, the Barnett Shale appears to be characterized best with a layered reservoir description where most of the well deliverability is associated with thin, higher permeability, naturally fractured zones, while most of the gas-in-place is confined to thicker, extremely low permeability layers. Gas-in-place in the Barnett Shale may average 10 to 12 Bscf per 160 acres, but the better wells are expected to recover only 1 to 1.5 Bscf in a twenty-year well life. Approximately 20% of the gas-in-place in the Barnett Shale is adsorbed gas; however, desorption appears to become important only after the reservoir pressure falls below 1,000 psia (original reservoir pressure is about 4,000 psia). Evaluation of fracturing pressures and post-fracture well tests suggests long, propped hydraulic fractures are being achieved and that the hydraulic fractures are typically contained within the Barnett Shale by limestone formations above and below.

author list (cited authors)

  • Lancaster, D. E., McKetta, S. F., Hill, R. E., Guidry, F. K., & Jochen, J. E

complete list of authors

  • Lancaster, DE||McKetta, SF||Hill, RE||Guidry, FK||Jochen, JE

publication date

  • December 1996