Application of UV-sulfite advanced reduction process to bromate removal

2015 . Bromate is a possible human carcinogen regulated in drinking water at a maximum contaminant level (MCL) of 10g/L. This research applied an advanced reduction process (ARP) that combined sulfite (SO32-) as a reducing agent and UV as the activating method to remove bromate. In addition to photolysis, this UV-sulfite ARP generates sulfite anion radicals (SO3-) and aqueous electrons (eaq-) that react with and reduce the target bromate. Results from batch experiments showed pseudo first-order removal of bromate with rate constants (Kobs) varying from 0.015 to 2.11min-1. The effect of process variables like sulfite dose, pH and UV characteristics on the kinetics were studied. The reduction kinetics improved with increasing sulfite doses and UV intensities. Acidic pH resulted in decreased kinetics, with pH above 7, resulting in the highest observed rate constants. Two different UV wavelengths, 222nm and 254nm were used to activate sulfite in solution. Lower wavelength UV resulted in kinetics two orders of magnitude higher than UV at 254nm. Quantum yields for this ARP were calculated to be in the range of 0.016-0.036mol/Einstein. The principal reduction end products were bromide and sulfate, with recovery of bromide ranging from 80% to 90%. The overall results indicate a promising application potential for ARPs in the removal of disinfection byproducts in water.

Overview