Experimental Evaluation of Guar Fracture Fluid Filter Cake Behavior
Conference Paper
Overview
Identity
Additional Document Info
Other
View All
Overview
abstract
AbstractGuar gum and its derivatives have been the most commonly used polymers to increase the viscosity of fracturing fluids. However, the conductivity of many fractures created with guar-based polymers is low because of residual unbroken polymer gel remaining in the fracture. This residue can cause permeability impairment in the proppant pack resulting in low fracture conductivity and decreased effective fracture length. In this study, we experimentally evaluated two important aspects of the gel damage process - the thickness of the polymer gel filter cake that is created as fracture fluid filtrate leaks off into the formation, and the yield stress of the concentrated polymer gel that accumulates in the fracture. The thickness of the filter cake created during the leakoff process was measured as a function of the polymer loading and the volume of leakoff. We created the filter cake following the procedure described by Ayoub et al. (2006), then measured the filter cake thickness with a precise laserprofilometer. We found that the filter cake thickness varied linearly with leakoff volume, meaning that the gel concentration factor is constant for this guar polymer fluid. The concentrated polymer filter cakes created by leakoff behave rheologically as Herschel-Bulkley fluids having a yield stress. The yield stress of this material is a critical parameter influencing whether or not the gel can be removed from the fracture. We measured the yield stress of borate-crosslinked guar polymer fracture fluids at concentrations up to 200 lb/mgals using a unique flat plate device. The yield stresses of th polymer filter cakes were found to depend strongly on the concentration of both polymer and breaker.
