Blank optimization for sheet metal forming using multi-step finite element simulations
Academic Article
Overview
Research
Identity
Additional Document Info
Other
View All
Overview
abstract
The present study aims to determine the optimum blank shape design for deep drawing of arbitrary shaped cups with a uniform trim allowance at the flange, i.e., cups without ears. The earing, or non-uniform flange, is caused by non-uniform material flow and planar anisotropy in the sheet. In this research, a new method for optimum blank shape design using finite element analysis is proposed. The deformation process is first divided into multiple steps. A shape error metric is defined to measure the amount of earing and to compare the deformed shape and target shape set for each stage of the analysis. This error metric is then used to decide whether the blank needs to be modified. The blank geometry change is based on material flow. The cycle is repeated until the converged results are achieved. This iterative design process leads to optimal blank shape. To test the proposed method, three examples of cup drawing are presented. In every case converged results are achieved after a few iterations. The proposed systematic method for optimal blank design is found to be very effective in the deep drawing process and can be further applied to other sheet metal forming applications such as stamping processes. 2008 Springer-Verlag London Limited.
