publication venue for
- Processing Techniques for ODS Stainless Steels. 49:3043-3055. 2018
- Erratum to: Stress-Induced Grain Growth in an Ultra-Fine Grained Al Alloy. 45:1948-1964. 2014
- Stress-Induced Grain Growth in an Ultra-Fine Grained Al Alloy. 45:795-810. 2014
- Gas Atomization of Amorphous Aluminum Powder: Part II. Experimental Investigation. 40:995. 2009
- Gas Atomization of Amorphous Aluminum: Part I. Thermal Behavior Calculations. 40:768-778. 2009
- Mechanisms of Grain Size Evolution during Aluminum Spray Forming. 39:862-869. 2008
- A numerical study of oxidation behavior during reactive atomization and deposition. 35:1173-1185. 2004
- The effect of particle size and morphology on the in-flight behavior of particles during high-velocity oxyfuel thermal spraying. 32:525-535. 2001
- Monosize droplet deposition as a means to investigate droplet behavior during spray deposition. 31:1333-1344. 2000
- On the mechanism of mushy layer formation during droplet-based processing. 30:527-539. 1999
- Modeling of porosity during spray forming: Part I. Effects of processing parameters. 29:1085-1096. 1998
- Modeling of porosity during spray forming: Part II. Effects of atomization gas chemistry and alloy compositions. 29:1097-1106. 1998
- Characterization of spray atomization of 3003 aluminum alloy during linear spray atomization and deposition. 29:793-806. 1998
- Investigation of thermal residual stresses in layered composite using the finite element method and X-ray diffraction. 28:969-978. 1997
- Particle penetration during spray forming and Co-injection of Ni3Al + B/Al2O3 intermetallic matrix composite. 28:877-897. 1997
- Modeling of the incorporation of ceramic participates in metallic droplets during spray atomization and coinjection. 25:135-147. 1994
- Foreword. 23:681-681. 1992
- Microstructure, excess solid solubility, and elevated-temperature mechanical behavior of spray-atomized and codeposited Al-Ti-SiCP. 23:719-736. 1992
- Leveraging federal research and development for United States science and technology. 21:799-818. 1990
- Stretching limits in sheet metals: In-plane versus out-of-plane deformation. 5:2161-2164. 1974
- Fracture surfaces of high-strength low-alloy (HSLA) steels. 5:2107-2110. 1974