publication venue for
- Effect of a new support design on the marginal and internal gap of additively manufactured interim crowns using direct light deposition technology. 2023
- Biaxial flexural strength and Weibull characteristics of a resin ceramic material after thermal-cycling. 2022
- Evaluation of Microshear Bond Strength of Four Different CAD‐CAM Polymer‐Infiltrated Ceramic Materials after Thermocycling. 31:623-628. 2022
- The Flexural Strength and Flexural Modulus of Stereolithography Additively Manufactured Zirconia with Different Porosities.. 31:434-440. 2022
- Best-Fit Algorithm Influences on Virtual Casts' Alignment Discrepancies. 2022
- Surface Roughness and Bond Strength of Resin Composite to Additively Manufactured Zirconia with Different Porosities.. 31:97-104. 2022
- Additively Manufactured Dental Crown with Color Gradient and Graded Structure: A Technique Report.. 30:822-825. 2021
- Influence of the Rinsing Postprocessing Procedures on the Manufacturing Accuracy of Vat-Polymerized Dental Model Material.. 30:610-616. 2021
- Analysis of Different Illuminance of the Room Lighting Condition on the Accuracy (Trueness and Precision) of An Intraoral Scanner.. 30:157-162. 2021
- Reducing the Risk of COVID-19 Transmission in Dental Offices: A Review.. 29:739-745. 2020
- Clinical Study of the Influence of Ambient Lighting Conditions on the Mesh Quality of an Intraoral Scanner.. 29:651-655. 2020
- Layperson and Dental Professional Perception When Evaluating Their Own Virtually 2D or 3D Simulated Esthetic Discrepancies.. 29:466-471. 2020
- Digitally Created 3-Piece Additive Manufactured Index for Direct Esthetic Treatment.. 29:436-442. 2020
- A 3D-Printed Guide to Assist in Sinus Slot Preparation for the Optimization of Zygomatic Implant Axis Trajectory.. 29:179-184. 2020
- Clinical Study of the Influence of Ambient Light Scanning Conditions on the Accuracy (Trueness and Precision) of an Intraoral Scanner.. 29:107-113. 2020
- Silicone Additive Manufactured Indices Performed from a Virtual Diagnostic Waxing for Direct Composite Diastema Closure Combined with Resin Infiltration Technique on White Spot Lesions: A Case Report.. 28:855-860. 2019
- Fracture Resistance of Additively Manufactured Zirconia Crowns when Cemented to Implant Supported Zirconia Abutments: An in vitro Study.. 28:893-897. 2019
- Facebow Use in Clinical Prosthodontic Practice.. 28:772-774. 2019
- Failure modes with point loading of three commercially available denture teeth.. 17:432-438. 2008
- A pilot study to evaluate different palate materials for maxillary complete dentures with xerostomic patients.. 8:10-17. 1999