publication venue for
- Two-region flow caused by pumping at a partial penetration well in a leaky confined aquifer. 47:717-735. 2023
- Non-Darcian flow toward an injection well fully penetrating a leaky confined aquifer with clogging-induced permeability reduction. 46:3217-3235. 2022
- Micromechanical modeling for rate-dependent behavior of salt rock under cyclic loading. 45:28-44. 2021
- Bounding surface-based modeling of compacted silty sand exhibiting suction dependent postpeak strain softening. 42:1741-1761. 2018
- Effect of combined translation and torsion on undrained uplift capacity of plate anchors: Plastic limit analysis (PLA) solution. 42:1567-1591. 2018
- A multiscale framework for the simulation of the anisotropic mechanical behavior of shale. 41:1494-1522. 2017
- Groundwater response to dual tidal fluctuations in a peninsula or an elongated island. 37:2456-2470. 2013
- Computational microstructure modeling to estimate progressive moisture damage behavior of asphaltic paving mixtures. 37:2005-2020. 2013
- Finite strain analysis of nonuniform deformation inside shear bands in sands. 36:1651-1666. 2012
- Thermodynamic-based model for coupling temperature-dependent viscoelastic, viscoplastic, and viscodamage constitutive behavior of asphalt mixtures. 36:817-854. 2012
- THM analysis of a large-scale heating test incorporating material fabric changes. 36:391-421. 2012
- Stochastic micromechanical model of the deterioration of asphalt mixtures subject to moisture diffusion processes. 35:1079-1097. 2011
- Influence of boundary conditions, specimen geometry and material heterogeneity on model calibration from triaxial tests. 34:627-643. 2010
- A moving-mesh finite-volume method to solve free-surface seepage problem in arbitrary geometries. 31:1609-1629. 2007
- A double structure generalized plasticity model for expansive materials. 29:751-787. 2005
- Three dimensional simulation of fluid flow in Xray CT images of porous media. 28:1327-1360. 2004
- Modelling poroelastic hollow cylinder experiments with realistic boundary conditions. 28:1189-1205. 2004
- Discrete vs smeared crack models for concrete fracture: bridging the gap. 28:583-607. 2004
- Inclined load capacity of suction caissons. 27:1235-1254. 2003
- Numerical modelling of fluid flow in microscopic images of granular materials. 26:53-74. 2002
- Stressstrain model for clays with anisotropic void ratio distribution. 22:393-416. 1998
- A METHOD OF TIME-DEPENDENT ANALYSIS USING ELASTIC SOLUTIONS FOR NONLINEAR MATERIALS. 11:421-431. 1987
- MEASUREMENT OF FLOW PROPERTIES OF EXPANSIVE CLAYS. 2:73-86. 1978
- Discrete vs smeared crack models for concrete fracture: bridging the gap 2004