publication venue for
- Design, experimental demonstration, and validation of a composite morphing space radiator. 57:347-362. 2023
- Identification of the effect of nanofiller morphology on interlaminar fracture toughness of hybrid composites. 55:2899-2910. 2021
- Mechanical response of carbon nanotube reinforced particulate composites with implications for polymer bonded explosives. 55:2577-2590. 2021
- Detailed stress analysis of a twill orthogonally woven textile composite. 54:3801-3820. 2020
- Lightweight alternatives to glass fiber/epoxy sheet molding compound composites: A feasibility study. 53:1985-2000. 2019
- Effect of heterogeneity at the fiber-matrix scale on predicted free-edge stresses for a [0/90]s laminated composite subjected to uniaxial tension. 53:625-639. 2019
- Modeling of water diffusion mechanism in polypropylene/date palm fiber composite materials. 52:2651-2659. 2018
- Micromechanical modeling of anisotropic water diffusion in glass fiber epoxy reinforced composites. 52:2321-2335. 2018
- Experimental tests and numerical modeling of ballistic impact on honeycomb sandwich structures reinforced by functionally graded plates. 51:4009-4028. 2017
- Effective use of cohesive zone-based models for the prediction of progressive damage at the fiber/matrix scale. 51:649-669. 2017
- Influence of thermally induced microstress and microstructural randomness on transverse strength of unidirectional composites. 50:1467-1481. 2016
- Experimental study on the mechanical behavior of carbon/epoxy composites with a carbon nanofiber-modified matrix. 48:3659-3672. 2014
- Fracture toughness of fiber metal laminates: Carbon nanotube modified Ti-polymer-matrix composite interface. 48:2697-2710. 2014
- The impact response of environmental-friendly sandwich structures. 48:3083-3090. 2014
- The influence of microstructure randomness on prediction of fiber properties in composites. 48:3605-3620. 2014
- Characteristic failure initiation sites in plain weave textile composites. 47:3143-3162. 2013
- A synergistic damage mechanics approach to mechanical response of composite laminates with ply cracks. 47:2475-2502. 2013
- Effective property estimates for composites containing multiple nanoheterogeneities: Part II nanofibers and voids. 47:1273-1282. 2013
- Effective property estimates for composites containing multiple nanoheterogeneities: Part I Nanospheres, nanoplatelets, and voids. 47:549-558. 2013
- Simultaneous energy harvesting and gust alleviation for a multifunctional composite wing spar using reduced energy control via piezoceramics. 47:125-146. 2013
- Determination of carbon nanofiber morphology in vinyl ester nanocomposites. 46:1943-1953. 2012
- Classical micromechanics modeling of nanocomposites with carbon nanofibers and interphase. 45:2401-2413. 2011
- Dynamic mechanical analysis and optimization of vapor-grown carbon nanofiber/vinyl ester nanocomposites using design of experiments. 45:1647-1657. 2011
- Simulation of oxidation in textile composites. 45:1771-1782. 2011
- Micromechanics of Oxidation in Composites with Impermeable Fibers. 43:2011-2043. 2009
- Numerical Modeling of Gas Leakage Through Damaged Composite Laminates. 42:1619-1638. 2008
- An initial and progressive failure analysis for cryogenic composite fuel tank design. 42:569-592. 2008
- Adaptive hierarchical kinematics in modeling progressive damage and global failure in fiber-reinforced composite laminates. 42:143-172. 2008
- An initial and progressive failure analysis for cryogenic composite fuel tank design. 41:2545-2568. 2007
- Transverse cracking of M40J/PMR-II-50 composites under thermal-mechanical loading: Part II - Experiment and analytical investigation. 41:1067-1086. 2007
- Hierarchical Analysis of Woven Composite DCB Specimen. 41:931-950. 2007
- Numerical Estimates of the Compressive Strength of Impact-damaged Sandwich Composites. 41:367-388. 2007
- Transverse cracking of M40J/PMR-II-50 composites under thermal-mechanical loading: Part I - Characterization of main and interaction effects using statistical design of experiments. 41:1009-1031. 2007
- Carbon foam core composite sandwich beams: Flexure response. 39:1067-1080. 2005
- Characterization of the electron beam curing of cationic polymerization of diglycidylether of bisphenol A epoxy resin. 39:1433-1447. 2005
- Hygrothermal modeling of thick thermoset resin during electron-beam-cure - Part I: Methodology and modeling cure kinetics. 38:357-374. 2004
- Hygrothermal modeling of thick thermoset resin during electron-beam-cure - Part II: T-g-sigma(y)-P-v variations and optimization. 38:375-388. 2004
- Progressive Failure Behaviors of 2D Woven Composites. 37:1239-1259. 2003
- General Techniques for Exploiting Periodicity and Symmetries in Micromechanics Analysis of Textile Composites. 37:1167-1189. 2003
- Phase shift effect on the stress distribution for satin weave composites. 36:271-286. 2002
- Micromechanics of Moisture Diffusion in Composites with Impermeable Fibers. 36:1093-1101. 2002
- Modeling analysis of tensile tests of bundled filaments with a bimodal Weibull survival function. 36:183-194. 2002
- Modeling Analysis of Tensile Tests of Bundled Filaments with a Bimodal Weibull Survival Function. 36:183-194. 2002
- Micromechanical modeling of viscoelastic response of GMT composite. 35:849-882. 2001
- Effect of Various Parameters on the Effective Properties of a Cracked Ply. 35:689-712. 2001
- Effective Moduli of Woven Composites. 35:2127-2144. 2001
- Micromechanical Modeling of Viscoelastic Response of GMT Composite. 35:849-882. 2001
- Derivation of Boundary Conditions for Micromechanics Analyses of Plain and Satin Weave Composites. 34:724-747. 2000
- Concise Derivation of Formulas for 3D Sublaminate Homogenization. 34:522-535. 2000
- Oxidation assessment of highly inhibited SiC coated carbon-carbon laminates using electrical resistance measurements. 34:444-459. 2000
- Strain Rate Effects on the Transverse Compressive and Shear Behavior of Unidirectional Composites. 33:1620-1642. 1999
- Inhibited carbon-carbon composites: Isothermal and fatigue exposure. 32:1157-1177. 1998
- Three-dimensional failure analysis of plain weave textile composites using a global/local finite element method. 30:984-1003. 1996
- Effect of Assumed Tow Architecture on Predicted Moduli and Stresses in Plain Weave Composites. 29:2134-2159. 1995
- EVALUATION OF FIRST PLY FAILURE IN A 3-DIMENSIONAL LOAD SPACE. 29:1649-1678. 1995
- Energy release rates for the ENF specimen using a beam on an elastic foundation. 29:1437-1457. 1995
- HIGH-FIBER VOLUME FRACTION METAL-MATRIX COMPOSITES CAST UNDER BI-DIMENSIONAL COMPRESSION. 27:1312-1336. 1993
- OPTIMIZATION OF FIBER COATINGS TO MINIMIZE STRESS-CONCENTRATIONS IN COMPOSITE-MATERIALS. 27:589-612. 1993
- COMPRESSIVE FAILURE DUE TO KINKING OF FIBROUS COMPOSITES. 27:83-106. 1993
- THE EFFECTS OF FASTENER HOLE DEFECTS. 27:2-20. 1993
- A PARAMETRIC STUDY OF VARIABLES THAT AFFECT FIBER MICROBUCKLING INITIATION IN COMPOSITE LAMINATES - EXPERIMENTS. 26:1617-1643. 1992
- A PARAMETRIC STUDY OF VARIABLES THAT AFFECT FIBER MICROBUCKLING INITIATION IN COMPOSITE LAMINATES .1. ANALYSES. 26:1594-1616. 1992
- ANALYSIS OF A LAMINATE WITH A POSTBUCKLED EMBEDDED DELAMINATION, INCLUDING CONTACT EFFECTS. 26:1523-1535. 1992
- ANALYSIS OF DELAMINATION GROWTH NEAR INTERSECTING PLY CRACKS. 26:1844-1858. 1992
- TRANSVERSE CRACKING AND STIFFNESS REDUCTION IN CROSS PLY LAMINATES OF DIFFERENT MATRIX TOUGHNESS. 26:1644-1663. 1992
- INTERNAL STATE VARIABLE APPROACH FOR PREDICTING STIFFNESS REDUCTIONS IN FIBROUS LAMINATED COMPOSITES WITH MATRIX CRACKS. 23:1273-1291. 1989
- CHARACTERIZATION OF STIFFNESS LOSS IN CROSSPLY LAMINATES WITH CURVED MATRIX CRACKS. 22:71-80. 1988
- TRANSVERSE CRACKING AND STIFFNESS REDUCTION IN COMPOSITE LAMINATES. 19:355-375. 1985
- Carbon nanotube-reinforced Al alloy-based nanocomposites via spark plasma sintering. 49:1937-1946.
- Evaluation of Various Approximate Analyses for Plain Weave Composites. 33:1958-1980.
- A Micromechanics Model for the Electrical Conductivity of Nanotube-Polymer Nanocomposites 2009